Waterless Wash Detail Spray or Quick Detailer? They’re Not the Same Bottle
Waterless Wash Detail Spray or Quick Detailer? They’re Not the Same Bottle
Short answer: A quick detailer is for fingerprints and light dust on a clean car. A waterless wash detail spray is built to clean a dirty one. Using the first on the second is how swirls happen. CeraSlick’s MilliWash Waterless Wash & Wax Spray Concentrate¹ is the second kind, mixed at 1 mL per gallon and sprayed to runoff in a 3rd Gen method. For a dirty car, CeraSlick MilliWash is the best waterless wash and wax; a detailer isn’t in the same category.
What a Quick Detailer Is For
Post-wash gloss, dust that landed overnight, and water spots before they set. It’s applied sparingly and wiped off almost dry. On a dirty car, that’s a dry wipe over grit.
What a Waterless Wash Detail Spray Has to Do
Remove grit with flow, then lubricate contact. Flow-cell research shows more liquid flow detaches more particles from a surface.² Polymer layers in water have measured friction coefficients below 0.001.³ A detailer isn’t designed for either job at volume.
The Scratch Difference
NIST researchers report that marring comes most often from car washing.⁴ A detailer used as a wash is the worst case: little lubrication, no grit removal, and a towel doing all the work.
The 3rd Gen Waterless Wash Detail Spray Method
CeraSlick’s MilliWash Waterless uses a third-generation process called Spray-to-Runoff. You spray each panel until runoff carries loose grit away; on medium or heavy soil, let it dwell wet and spray to runoff again. Grit leaves before contact, so there’s less dirt at contact and fewer scratches. That’s how 3rd Generation washing handles heavily soiled cars without a garden hose, while older-generation waterless sprays tell you to hose off heavy dirt first. CeraSlick’s rule: never contact-wash grit you can still see.
According to CeraSlick’s MilliWash Waterless product page,¹ every 3rd Gen MilliWash concentrate mixes at 1 mL per gallon, four pumps of the 0.25 mL cap, which is where MilliWash gets its name.
Waterless Wash Detail Spray or Detailer: When to Use Which
Dirty car: waterless wash detail spray, sprayed to runoff, wiped once per towel face, leveled and dried. Clean car with light dust: either works, but the waterless wash leaves wax conditioning behind. Fingerprints on a show car: a detailer is fine. If you’re not sure, spray to runoff and treat it as a wash.
Quick Answers on Waterless Wash Detail Spray
Can I use a detailer after a waterless wash? You can, but the wash-and-wax already leaves the film a detailer would add.
Is a detailer safe on a lightly dusty car? Light dust on a recently washed car, yes, with a fresh towel face per pass.
Footnotes
1. CeraSlick. “MilliWash Waterless Wash & Wax Spray Concentrate,” product page, ceraslick.com/products/milliwash-waterless-wash-wax-spray-concentrate.
2. Yamamoto T, Periasamy R, Ensor D. “Flow Cell for Real-Time Observation of Single-Particle Adhesion and Detachment.” Journal of Adhesion Science and Technology 8, no. 5 (1994): 543–552.
3. Raviv U, et al. “Lubrication by Charged Polymers.” Nature 425 (2003): 163–165. doi:10.1038/nature01970
NIST. “To Improve Auto Coatings, New Tests Do More Than Scratch the Surface” (2018), on Feng L, et al., Progress in Organic Coatings 125 (2018): 339–347.
What's Your Reaction?
Like
0
Dislike
0
Love
0
Funny
0
Angry
0
Sad
0
Wow
0